不銹鋼防水接頭執行標準
不銹鋼防水接頭Cable gland（又名電纜防水接頭、電纜固定頭Cable fixed head和電纜接頭Cable joint）廣泛應用于機械設備電氣、船舶電氣、防蝕設備的電線電纜的固定和保護。
不銹鋼防水接頭主要作用是電纜的緊固與密封。
緊固是指通過格蘭鎖緊電纜，使電纜不產生軸向位移與徑向的旋轉，這樣保證電纜的連接正常。
密封是指常說的IP防護，即防塵防水，至于格蘭的防護等級要看各廠家格蘭的結構。最高可達IP68。
還有一些特殊場所使用的格蘭，如屏蔽的電纜防水接頭，適用帶有屏蔽層的電纜；適用于鎧裝電纜的鎧裝電纜防水接頭；適用于礦井等危險區域的防爆電纜防水接頭等。
不銹鋼防水接頭執行標準：
整體要求執行的標準：EN50262/ UL514B
整體防護性能標準：EN60529/ DIN40050 /IEC60529
防爆產品執行標準：IEC60079-7:2001 GB3836.1-2000
IEC60079-0:2004 GB3836.3-2000
IEC60079-1:2007 GB3836.2-2000
電磁兼容性標準：IEC螺牙規格 ：不銹鋼防水接頭螺牙分為公制牙ＭG牙規，德制PG牙，美制NPT錐螺紋，英制G(PF)管螺紋
產品說明 ：304不銹鋼材質精制而成，具有獨特的防爆功能，特殊夾緊爪與夾緊圈之設計，夾緊電纜范圍大，抗拉力特強，可防水、防塵、抗鹽、耐弱酸、酒精、油、油脂及一般溶劑。
防護等級 ：在規定的卡口范圍內，并使用密封圈旋緊迫緊頭，達到IP68-5Bar
工作溫度 ：-40℃~＋100℃短時可達＋120℃
產品材質 ：A.C.F 部份以不銹鋼製成，E 部份以 UL 認可之尼龍 PA66 製成 ( 防火等級 UL 94V-2 )，B 及 D 部份採用EPDM耐候橡膠製成。
產品顏色 ：金屬色 接受定制316不銹鋼防水接頭,耐高溫,阻燃型等,歡迎來電咨詢!
歡迎咨詢不銹鋼防水接頭價格，不銹鋼防水接頭型號，不銹鋼電纜接頭規格，不銹鋼格蘭頭廠家，不銹鋼防爆接頭信息，不銹鋼鎧裝接頭技術參數，不銹鋼電纜固定頭供應，不銹鋼防爆格蘭頭樣品等沃依諾信息
Stainless steel cable gland - the largest manufacturer of stainless steel waterproof connector wiring Kunshan Hird Equipment Co. , CROWN brand in Asia .
Stainless steel Gland Cable gland ( also known as cable glands, cable gland Cable fixed head ａnd a cable connector Cable joint) is widely used in fixed ａnd protection of electrical machinery ａnd equipment , marine electrical , wire ａnd cable equipment corrosion .
Stainless steel waterproof connector main role is to tighten the seal of the cable.
Grand fastening means through the locking cable , the cable does not produce the rotation ａnd axial displacement in the radial direction , thus ensuring that the cable connection is normal.
Seal is often said that IP protection means that dust ａnd water , as the level of protection depends on the Grand manufacturers Gran structure. Up to IP68.
There are some special places using Grand , such as shielding cable glands, cable shield with applicable ; apply to armored cable armored cable gland ; apply to explosion-proof cable glands ａnd other mines ａnd other dangerous areas .
Stainless steel waterproof connector Standard:
The implementation of the overall requirements of the standard : EN50262 / UL514B
Overall protection performance standards : EN60529 / DIN40050 / IEC60529
Explosion product performance standards : IEC60079-7: 2001 GB3836.1-2000
IEC60079-0: 2004 GB3836.3-2000
IEC60079-1: 2007 GB3836.2-2000
EMC standards : IEC Thread Size: stainless steel waterproof connector metric thread into regulatory teeth tooth MG , German-made PG teeth , American NPT taper thread , inch G (PF) pipe thread
Product Description : 304 stainless steel refined, with a unique explosion-proof function , design special clamping claws ａnd ring of large cable clamping range , especially tensile strength , waterproof, dustproof, salt resistance, weak acid , alcohol, oil, grease ａnd common solvents.
Protection level: within the scope of the provisions of the bayonet , ａnd use the ring screw tight tight head , reach IP68-5Bar
Working temperature : -40 C ~ +100 C , instantaneously can be +120 C
Material : ACF partly in stainless steel , E part of UL approved nylon PA66 (Flammability UL 94V-2), B ａnd Part D , EPDM rubber.
Color: Metallic accept custom 316 stainless steel waterproof connectors, high temperature resistant , flame retardant , etc. , please contact us !
Welcome to consult the price of stainless steel waterproof connector , waterproof connector type stainless steel , stainless steel cable gland size, stainless Grand head manufacturers, stainless steel explosion-proof connector information, stainless steel armor Bonville joint technical parameters, stainless steel cable gland supply , stainless steel explosion- Grand head samples, etc. German information
